DO YOU HAVE EXCESS I.T EQUIPMENT? SELL IT TO US!
THE BEST IN BUYBACK PROGRAMS!

GreenTek Solutions LLC
Call us today for more information.
Our Hassle-free buyback program offers:

ITEM DESCRIPTION

This item is in used but good working condition. It was pulled from a working environment. Since this item is in used condition, it is possible that it can show some normal signs of wear, for example: scratches or scuffs but nothing that will affect performance.Tested for Full Functions, R2/Ready for Reuse

We offer a 30 day satisfaction guaranteed warranty on all the items listed in our eBay Store. If for some reason you're not happy with your purchase, please don't hesitate to contact us and we will try our best to fix it.

WB

UNIT ONLY HAS 24-PORTS ACTIVE!!!

INCLUDED ITEMS

1x Brocade VDX BR-VDX6740-48-R Switch' Refurbished

2x Power Cord

1x Serial Console Cable

Tech Specs

1 Storage Device(s) found 
Hit ESC to stop autoboot: 0 
Loading Environment 0 from NVRAM... 
(Re)start USB 0... 
USB: Register 10011 NbrPorts 1 
USB EHCI 1.00 
scanning bus for devices... 2 USB Device(s) found 
scanning bus for storage devices... 1 Storage Device(s) found 
setting prt to 2 
Loading file "/boot/fastloading.mdt" from usb device 0:2 (usbda2) 
184 bytes read 
Image: [uImage] 
Image: [hv.uImage] 
Image: [silkworm.dtb] 
Image: [silkworm_hct.dtb] 
WARNING: adjusting available memory to 30000000 
## Booting kernel from Legacy Image at 02000000 ... 
Image Name: 
Image Type: PowerPC Linux Kernel Image (uncompressed) 
Data Size: 420064 Bytes = 410.2 KiB 
Load Address: 00000000 
Entry Point: 00000000 
Verifying Checksum ... OK 
## Flattened Device Tree blob at 04000000 
Booting using the fdt blob at 0x4000000 
Loading Kernel Image ... OK 
OK 
Loading Device Tree to 00ff7000, end 00fff1e3 ... OK 
======================================= 
Freescale Hypervisor 0.8-004 
Hypervisor command line: config-addr=0x3000000 p1-linux="root=/dev/sda2 rootfstype=ext4 quiet" 
[0] malloc_init: using 31 MiB at 0x7e0b7930 - 0x7fffffff 
Device tree compatible: brocade,SILKWORM_PB 
[0] dt_read_aliases: Alias pci1 points to non-existent /pcie@ffe201000 
[0] dt_read_aliases: Alias sec_jr0 points to non-existent /soc@ffe000000/crypto@300000/jr@1000 
[0] dt_read_aliases: Alias sec_jr1 points to non-existent /soc@ffe000000/crypto@300000/jr@2000 
[0] dt_read_aliases: Alias sec_jr2 points to non-existent /soc@ffe000000/crypto@300000/jr@3000 
[0] dt_read_aliases: Alias sec_jr3 points to non-existent /soc@ffe000000/crypto@300000/jr@4000 
[0] dt_read_aliases: Alias rtic_a points to non-existent /soc@ffe000000/crypto@300000/rtic@6000/rtic-a@0 
[0] dt_read_aliases: Alias rtic_b points to non-existent /soc@ffe000000/crypto@300000/rtic@6000/rtic-b@20 
[0] dt_read_aliases: Alias rtic_c points to non-existent /soc@ffe000000/crypto@300000/rtic@6000/rtic-c@40 
[0] dt_read_aliases: Alias rtic_d points to non-existent /soc@ffe000000/crypto@300000/rtic@6000/rtic-d@60 
[0] assign_callback: device serial0 in serial0 not found 
[0] assign_callback: device /hvcpld in fpga not found 
[0] remap_restart_init: undefine restart-maps-to. Setting to remap_restart_unc. 
[0] watchdog enabled with period 38 
[1] watchdog enabled with period 38 
[3] watchdog enabled with period 38 
[2] watchdog enabled with period 38 
[0] assign_callback: device /soc/memory-controller@9000 in memory-controller@9000 not found 
[0] assign_callback: device mdio0 in mdio0 not found 
[0] assign_callback: device phy5 in phy5 not found 
Bootargs set for cpu = 0 guest p1-linux bootagrs = root=/dev/sda2 rootfstype=ext4 quiet 
HV> 
part1 ACTIVE 
[0] loading binary image from 0x79fff000 to 0x3000000 
[0] Loading uImage from 0x78000000 to 0 
[0] branching to guest p1-linux, 2 cpus 
HV> this is quiet! 

end of DRAM 4294967296 memstart_addr0 total_lowmem 4294967296 
SLUB: dfree enabled 
PRIMING SLUB: main caches 
SLUB: export __kmalloc at 0x401068c0 changed to 0x40106c80 
SLUB: export vmalloc at 0x400f55a8 changed to 0x400f535c 
SLUB: export vfree at 0x400f4748 changed to 0x400f4678 
network namespace NR (VRF) started 
mmod_sysctl_inited: 1 

Fman microcode 51 45 46 

FMAN microcode UC size 0x1b64 
default MII is 0xc10a4000 for tsec0 
default MII is 0xc10ac000 for tsec0 
Uboot wdt counter value: 0 
INIT: version 2.78 booting 
e2fsck 1.41.12 (17-May-2010) 
/dev/sda2: clean, 18030/122160 files, 221609/488192 blocks 
e2fsck 1.41.12 (17-May-2010) 
/dev/sda1: recovering journal 
/dev/sda1: clean, 9208/122160 files, 146401/488281 blocks 
Firmware Integrity Check is default off 
Bypassing firmware validation. 
mount: sysfs already mounted or /sys busy 
mount: according to mtab, none is already mounted on /sys 
mknod: /dev/fsl-hv: File exists 
Hostname is fc-vdx40-dev-01 
INIT: Entering runlevel: 3 
FIPS-mode test application 

1. Non-Approved cryptographic operation test... 
a. Excluded algorithm (MD5)...successful 
b. Included algorithm (D-H)...successful 
2. Automatic power-up self test...successful 
3. AES-128,192,256 CBC encryption/decryption...successful 
4. RSA key generation and encryption/decryption...successful 
4.1. RSA 2048 with 'SHA256' testing...successful 
5. TDES-CBC encryption/decryption...successful 
6a. SHA-1 hash...successful 
6b. SHA-256 hash...successful 
6c. SHA-512 hash...successful 
6d. HMAC-SHA-1 hash...successful 
6e. HMAC-SHA-224 hash...successful 
6f. HMAC-SHA-256 hash...successful 
6g. HMAC-SHA-384 hash...successful 
6h. HMAC-SHA-512 hash...successful 
7. Non-Approved cryptographic operation test... 
a. Excluded algorithm (MD5)...Not executed 
b. Included algorithm (D-H)...successful as expected 
8. Zero-ization...Successful 
9. TLS KDF...successful 
10. SSH KDF...successful 

All tests completed with 0 errors 
Waiting to starting configuration management service 
Starting configuration management service 
/etc/rc.d/rc3.d/S95fabos: [: missing `]' 
[wmd_init]: chunk_size = 0xa00000 
[wmd_init]: Checksum does not match. current_cksum = 0x16c0388f stored_cksum = 0x8fd5a6c1 
[wmd_init]: FPGA version = 0x002223a3 
[wmd_init]: reset_reason = 0x1 
[wmd_init]: updated reset_reason = 0x0 

Reset reason = 0x1 
wmem: b0004000:247439360 
tbuf: 8ff00000:536854528 
Found 1(threshold 5) abnormal reboots within 3000 seconds window(threshold) 
KernelSpace rastrace_register 
SWBD module launch ... Tue Sep 3 19:13:37 GMT 2019 
bhpc_irq_init: Using default device map. Size 10 

pcie_event_isr: ###### virq 170 core 1 MCSR 0x0 MSR 0x10021002 count 1 
CPLD INIT DONE 
PCIe Event [UNKNOWN] slot 0 Source Bus 0 Dev 0 MM Parent Bus 0 Dev 0 Events: 1 
cbr_rev_init: pci config word 0xc0220008 for Castors 
cbr_rev_init: prs_reg[0].ctrl=0x00000102 
cbr_rev_init: chip_rev detected=2 
Cobra rev B found 
Info: panic dump has been initialized! 
Creating L3-L2 fifo Tue Sep 3 19:13:48 GMT 2019 ... 
Starting HASM ... Tue Sep 3 19:13:48 GMT 2019 
Exisitng reboot reason fsize = 5 rb= 
Global Fan Direction: Port Side EXHAUST 


Network OS (fc-vdx40-dev-01) 


fc-vdx40-dev-01 console login: Starting Ccmd ... Tue Sep 3 19:13:55 GMT 2019 
Starting Dcmd ... Tue Sep 3 19:13:55 GMT 2019 
server starting 
Restoring DCM databaseserver starting 
Restoring CCM database....tp_register, got none fss tp handle=10000001h 
..2019/09/03-19:14:01, [HASM-1004], 13306,, INFO, VDX6740, Processor reloaded - Reset. 
....done 
done 
waiting for server to shut down.... done 
server stopped 



Network OS (fc-vdx40-dev-01) 


fc-vdx40-dev-01 console login: root 


Password: 

Disclaimer for Root and Factory Accounts Usage! 

This switch is equipped with Root and Factory accounts that are intended 
for diagnostics and debugging purposes solely by the Equipment vendor's 
trained engineers. Improper use of the functionality made available 
through the Root or Factory account could cause significant harm and 
disruption to the operation of the SAN fabric. 

Your use of the functionality made available through the Root or Factory 
account is at your sole risk and you assume all liability resulting from 
such use. The Equipment vendor shall have no liability for any losses 
or damages arising from or relating to the use of the Root or Factory 
account (and the functionality enabled thereby) by anyone other than 
the Equipment vendor's authorized engineers. 

Proceeding with the usage of this switch as the Root or Factory user 
explicitly indicates your agreement to the terms of this disclaimer. 

Please change passwords for switch default accounts now. 
Use Control-C to exit or press 'Enter' key to proceed. 

Changing default password for "root" 
Warning: Access to the Root account may be required for 
complete access of the switch. Please ensure the Root 
password is documented in a secure location. Recovery of a 
lost Root password will result in downtime. 

Changing password for root 
Enter new password: 
Password unchanged. 

passwd: Authentication token manipulation error 

fc-vdx40-dev-01:root> 
fc-vdx40-dev-01:root> waiting for server to shut down...... done 
server stopped 
Tue Sep 3 19:16:59 GMT 2019 :: Confd: Waiting for Dcmd to become ready... 
CHASSIS RECOV_ACTIVE 

SNMP Research EMANATE/Lite Agent Version 16.2.0.9
Copyright 1989-2006 SNMP Research, Inc.
Tue Sep 3 19:17:12 GMT 2019 :: Triggering confd load phase1 after waiting for 5 secs
Critical FDB init success

Warn: imi_debug :zg->protocol is not set before lib_start()
pcap_master_init - sm is NULL after ha_calloc
2019/09/03-19:17:27, [BGP-1002], 13307,, INFO, fc-vdx40-dev-01, BGP: Daemon ready for action
.
nsm_client_start - ret = 0


CMSH called

nsm_client_start_resp_socket-2874 Starts ...
message_client_connect_resp_socket-859 ends
nsm_client_start_resp_socket-2894 succeeds.
Activating haml.. l2sys_client_haml_activate
NOS : Initialize DY-SYNC LIB : mgmt_state 34002110
NOS : Init bc_pkt 1024cc24 bc_index 20 ***
***********************************************************
hal_new_link_cb: NSM: initialized system SVI mac: 50:eb:1a:12:04:87
************************************************************
2019/09/03-19:17:33, [NSM-1019], 13308, DCE, INFO, fc-vdx40-dev-01, Interface Ve 4093 is administratively up.
2019/09/03-19:17:35, [MFIC-1002], 13309,, INFO, fc-vdx40-dev-01, Chassis FRU header not programmed for switch NID, using defaults (applies only to FICON environments).
2019/09/03-19:17:37, [SEC-1197], 13310,, INFO, VDX6740, Changed account admin.
2019/09/03-19:17:37, [SEC-1197], 13311,, INFO, VDX6740, Changed account user.
chassisshow

Chassis Name: BR-VDX6740
switchType: 131

FAN Unit: 1 
Time Awake: 0 days

FAN Unit: 2 
Time Awake: 0 days

POWER SUPPLY Unit: 1 
Factory Part Num: 23-1000044-01
Factory Serial Num: 
Time Awake: 0 days

POWER SUPPLY Unit: 2 
Factory Part Num: 23-1000044-01
Factory Serial Num: 
Time Awake: 0 days

CHASSIS/WWN Unit: 1
Power Consume Factor: 0
Factory Part Num: 40-1000927-06
Factory Serial Num: CPL2521K0M6
Manufacture: Day: 9 Month: 4 Year: 14
Update: Day: 2 Month: 7 Year: 2019
Time Alive: 1727 days
Time Awake: 0 days

fc-vdx40-dev-01:root> l licenseshow
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
10G Port Upgrade license
Feature name:PORT_10G_UPGRADE
Capacity: 24
License is valid
fc-vdx40-dev-01:root> ?
sh: ?: command not found

fc-vdx40-dev-01:root>
Display all 1836 possibilities? (y or n)
fc-vdx40-dev-01:root>
fc-vdx40-dev-01:root> sh ver ver chasssis isshow

Chassis Name: BR-VDX6740
switchType: 131

FAN Unit: 1 
Time Awake: 0 days

FAN Unit: 2 
Time Awake: 0 days

POWER SUPPLY Unit: 1 
Factory Part Num: 23-1000044-01
Factory Serial Num: 
Time Awake: 0 days

POWER SUPPLY Unit: 2 
Factory Part Num: 23-1000044-01
Factory Serial Num: 
Time Awake: 0 days

CHASSIS/WWN Unit: 1
Power Consume Factor: 0
Factory Part Num: 40-1000927-06
Factory Serial Num: CPL2521K0M6
Manufacture: Day: 9 Month: 4 Year: 14
Update: Day: 2 Month: 7 Year: 2019
Time Alive: 1727 days
Time Awake: 0 days

fc-vdx40-dev-01:root> reboot
Warning: This command would cause the switch to reboot
and result in traffic disruption.
Are you sure you want to reboot the switch [y/n]?y
Shutting Down Database ...... (New)
Calling DcmClient for CCM
Calling DcmClient for Dcm
Completed
2019/09/20-15:15:25, [RAS-1007], 13754,, INFO, VDX6740, System is about to
reload.

Broadcast message from root (ttyS0) Fri Sep 20 15:15:31 2019...

The system is going down for reboot NOW !!
INIT: Switching to runlevel: 6
INIT: Sending processes the TERM signal
fc-vdx40-dev-01:root> INIT: Sending processes the KILL signal
Disabling wdt: Fri Sep 20 15:15:43 GMT 2019
Unmounting all filesystems: Fri Sep 20 15:15:43 GMT 2019
Please stand by while rebooting the system... Fri Sep 20 15:15:45 GMT 2019
Syncing file system
Rebooting...

Hypervisor Resetting due to: hcall_system_reset
HV> [0]
Hypervisor Reset Flush:

HV>

BootROM version: 1.0.30
Copyright (C) 2011 Brocade Communication.

CPU0: P3041, Version: 2.0, (0x82110320)
Core: E500MC, Version: 3.2, (0x80230032)
Clock Configuration:
CPU0:1500 MHz, CPU1:1500 MHz, CPU2:1500 MHz, CPU3:1500 MHz,
CCB:750 MHz,
DDR:500 MHz (1000 MT/s data rate) (Asynchronous), LBC:46.875 MHz
FMAN1: 375 MHz
PME: 375 MHz
L1: D-cache 32 kB enabled
I-cache 32 kB enabled
Model ID: 131
Board: P3041 CASTOR, 36-bit Addressing
reset reason was 0x00000002: CPU request
I2C: ready
DRAM: Initializing....
Enabled DHC_EN
DIMM 0 [0xfe008174=0x8675a607] [0xfe008f38=0x10100d0b] [0xfe008f3c=0x0a0c0d
0e] [0xfe008f40=0x0c004004]
6 GiB left unmapped
DDR: 8 GiB (DDR3, 64-bit, CL=7, ECC on)
testdram value not set, dram test not run
Now running in RAM - U-Boot at: 7ff20000
FLASH: 4 MiB
L2: 128 KB enabled
Corenet Platform Cache: 1024 KB enabled
SERDES: bank 2 disabled
PCI: gd->brcd_flags = 0, PCI init
PCIE1 connected to Slot 1 as Root Complex (base addr fe200000)
Scanning PCI bus 01
PCIE0 on bus 00 - 01
In: serial
Out: serial
Err: serial
SRIO1: disabled
SRIO2: disabled
NVRAM/RTC oscillator already turned on in a previous boot
Net: Fman: Uploading microcode version 101.6.0.
FM1@DTSEC4, FM1@DTSEC5
usb reset 0
(Re)start USB 0...
USB: Register 10011 NbrPorts 1
USB EHCI 1.00
scanning bus for devices... 2 USB Device(s) found
scanning bus for storage devices... 1 Storage Device(s) found
Hit ESC to stop autoboot: 5 4 3 2 1 0
Loading Environment 0 from NVRAM...
(Re)start USB 0...
USB: Register 10011 NbrPorts 1
USB EHCI 1.00
scanning bus for devices... 2 USB Device(s) found
scanning bus for storage devices... 1 Storage Device(s) found
setting prt to 2
Loading file "/boot/fastloading.mdt" from usb device 0:2 (usbda2)
184 bytes read
Image: [uImage]
Image: [hv.uImage]
Image: [silkworm.dtb]
Image: [silkworm_hct.dtb]
WARNING: adjusting available memory to 30000000
## Booting kernel from Legacy Image at 02000000 ...
Image Name: 
Image Type: PowerPC Linux Kernel Image (uncompressed)
Data Size: 420064 Bytes = 410.2 KiB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
## Flattened Device Tree blob at 04000000
Booting using the fdt blob at 0x4000000
Loading Kernel Image ... OK
OK
Loading Device Tree to 00ff7000, end 00fff1e3 ... OK
=======================================
Freescale Hypervisor 0.8-004
Hypervisor command line: config-addr=0x3000000 p1-linux="root=/dev/sda2 ro
otfstype=ext4 quiet"
[0] malloc_init: using 31 MiB at 0x7e0b7930 - 0x7fffffff
Device tree compatible: brocade,SILKWORM_PB
[0] dt_read_aliases: Alias pci1 points to non-existent /pcie@ffe201000
[0] dt_read_aliases: Alias sec_jr0 points to non-existent /soc@ffe000000/cr
ypto@300000/jr@1000
[0] dt_read_aliases: Alias sec_jr1 points to non-existent /soc@ffe000000/cr
ypto@300000/jr@2000
[0] dt_read_aliases: Alias sec_jr2 points to non-existent /soc@ffe000000/cr
ypto@300000/jr@3000
[0] dt_read_aliases: Alias sec_jr3 points to non-existent /soc@ffe000000/cr
ypto@300000/jr@4000
[0] dt_read_aliases: Alias rtic_a points to non-existent /soc@ffe000000/cry
pto@300000/rtic@6000/rtic-a@0
[0] dt_read_aliases: Alias rtic_b points to non-existent /soc@ffe000000/cry
pto@300000/rtic@6000/rtic-b@20
[0] dt_read_aliases: Alias rtic_c points to non-existent /soc@ffe000000/cry
pto@300000/rtic@6000/rtic-c@40
[0] dt_read_aliases: Alias rtic_d points to non-existent /soc@ffe000000/cry
pto@300000/rtic@6000/rtic-d@60
[0] assign_callback: device serial0 in serial0 not found
[0] assign_callback: device /hvcpld in fpga not found
[0] remap_restart_init: undefine restart-maps-to. Setting to remap_restart_
unc.
[0] watchdog enabled with period 38
HV> [1] watchdog enabled with period 38
HV> [2] watchdog enabled with period 38
HV> [3] watchdog enabled with period 38
HV> [0] assign_callback: device /soc/memory-controller@9000 in memory-controlle
r@9000 not found
HV> [0] assign_callback: device mdio0 in mdio0 not found
HV> [0] assign_callback: device phy5 in phy5 not found
HV> Bootargs set for cpu = 0 guest p1-linux bootagrs = root=/dev/sda2 rootfsty
pe=ext4 quiet
HV>
part1 ACTIVE
HV> [0] loading binary image from 0x79fff000 to 0x3000000
HV> [0] Loading uImage from 0x78000000 to 0
HV> [0] branching to guest p1-linux, 2 cpus
HV> this is quiet!

end of DRAM 4294967296 memstart_addr0 total_lowmem 4294967296
SLUB: dfree enabled
PRIMING SLUB: main caches
SLUB: export __kmalloc at 0x401068c0 changed to 0x40106c80
SLUB: export vmalloc at 0x400f55a8 changed to 0x400f535c
SLUB: export vfree at 0x400f4748 changed to 0x400f4678
network namespace NR (VRF) started
mmod_sysctl_inited: 1

Fman microcode 51 45 46 

FMAN microcode UC size 0x1b64
default MII is 0xc10a4000 for tsec0
default MII is 0xc10ac000 for tsec0
Uboot wdt counter value: 0
^[[0nINIT: version 2.78 booting
e2fsck 1.41.12 (17-May-2010)
/dev/sda2: clean, 17957/122160 files, 221844/488192 blocks
e2fsck 1.41.12 (17-May-2010)
/dev/sda1: clean, 9208/122160 files, 146402/488281 blocks
Firmware Integrity Check is default off
Bypassing firmware validation.
mount: sysfs already mounted or /sys busy
mount: according to mtab, none is already mounted on /sys
mknod: /dev/fsl-hv: File exists
Hostname is fc-vdx40-dev-01
INIT: Entering runlevel: 3
FIPS-mode test application

1. Non-Approved cryptographic operation test...
a. Excluded algorithm (MD5)...successful
b. Included algorithm (D-H)...successful
2. Automatic power-up self test...successful
3. AES-128,192,256 CBC encryption/decryption...successful
4. RSA key generation and encryption/decryption...successful
4.1. RSA 2048 with 'SHA256' testing...successful
5. TDES-CBC encryption/decryption...successful
6a. SHA-1 hash...successful
6b. SHA-256 hash...successful
6c. SHA-512 hash...successful
6d. HMAC-SHA-1 hash...successful
6e. HMAC-SHA-224 hash...successful
6f. HMAC-SHA-256 hash...successful
6g. HMAC-SHA-384 hash...successful
6h. HMAC-SHA-512 hash...successful
7. Non-Approved cryptographic operation test...
a. Excluded algorithm (MD5)...Not executed
b. Included algorithm (D-H)...successful as expected
8. Zero-ization...Successful
9. TLS KDF...successful
10. SSH KDF...successful

All tests completed with 0 errors
Waiting to starting configuration management service
Starting configuration management service
/etc/rc.d/rc3.d/S95fabos: [: missing `]'
[wmd_init]: chunk_size = 0xa00000
[wmd_init]: Checksum does not match. current_cksum = 0x16c0388f stored_cksu
m = 0x8fd5a6c1
[wmd_init]: FPGA version = 0x002223a3
[wmd_init]: reset_reason = 0x2
[wmd_init]: updated reset_reason = 0x0

Reset reason = 0x2
wmem: b0004000:247439360
tbuf: 8ff00000:536854528
KernelSpace rastrace_register
SWBD module launch ... Fri Sep 20 15:16:28 GMT 2019
bhpc_irq_init: Using default device map. Size 10

pcie_event_isr: ###### virq 170 core 1 MCSR 0x0 MSR 0x10021002 count 1
CPLD INIT DONE
PCIe Event [UNKNOWN] slot 0 Source Bus 0 Dev 0 MM Parent Bus 0 Dev 0 Event
s: 1
cbr_rev_init: pci config word 0xc0220008 for Castors
cbr_rev_init: prs_reg[0].ctrl=0x00000102
cbr_rev_init: chip_rev detected=2
Cobra rev B found
Info: panic dump has been initialized!
Creating L3-L2 fifo Fri Sep 20 15:16:39 GMT 2019 ...
Starting HASM ... Fri Sep 20 15:16:39 GMT 2019


Network OS (fc-vdx40-dev-01)


fc-vdx40-dev-01 console login: Global Fan Direction: Port Side EXHAUST
Starting Dcmd ... Fri Sep 20 15:16:48 GMT 2019
Starting Ccmd ... Fri Sep 20 15:16:48 GMT 2019
tp_register, got none fss tp handle=10000001h
2019/09/20-15:16:52, [HASM-1004], 13755,, INFO, VDX6740, Processor reloaded
- Reboot.
Fri Sep 20 15:17:16 GMT 2019 :: Confd: Waiting for Dcmd to become ready...
CHASSIS RECOV_ACTIVE
SNMP Research EMANATE/Lite Agent Version 16.2.0.9
Copyright 1989-2006 SNMP Research, Inc.
Fri Sep 20 15:17:29 GMT 2019 :: Triggering confd load phase1 after waiting
for 5 secs

Warn: imi_debug :zg->protocol is not set before lib_start()
pcap_master_init - sm is NULL after ha_calloc
Critical FDB init success
2019/09/20-15:17:43, [BGP-1002], 13756,, INFO, fc-vdx40-dev-01, BGP: Daemo
n ready for action
.


CMSH called

nsm_client_start - ret = 0
nsm_client_start_resp_socket-2874 Starts ...
message_client_connect_resp_socket-859 ends
nsm_client_start_resp_socket-2894 succeeds.
Activating haml.. l2sys_client_haml_activate
NOS : Initialize DY-SYNC LIB : mgmt_state 34002110
NOS : Init bc_pkt 1024cc24 bc_index 20 ***
***********************************************************
hal_new_link_cb: NSM: initialized system SVI mac: 50:eb:1a:12:04:87
************************************************************
2019/09/20-15:17:50, [NSM-1019], 13757, DCE, INFO, fc-vdx40-dev-01, Interf
ace Ve 4093 is administratively up.
2019/09/20-15:17:51, [MFIC-1002], 13758,, INFO, fc-vdx40-dev-01, Chassis FR
U header not programmed for switch NID, using defaults (applies only to FIC
ON environments).
2019/09/20-15:17:53, [SEC-1197], 13759,, INFO, VDX6740, Changed account adm
in.
2019/09/20-15:17:53, [SEC-1197], 13760,, INFO, VDX6740, Changed account use
r.
All service instances on Active
2019/09/20-15:17:57, [HASM-1108], 13761,, INFO, VDX6740, All service instan
ces become active.
2019/09/20-15:17:57, [DCM-1002], 13762,, INFO, VDX6740, PostBoot processing
on global config has started.
2019/09/20-15:17:58, [DOT1-1013], 13763, DCE, INFO, fc-vdx40-dev-01, DOT1X
test timeout value is set to 10.
2019/09/20-15:17:58, [ONMD-1002], 13764, DCE, INFO, fc-vdx40-dev-01, LLDP g
lobal configuration is changed.
2019/09/20-15:17:58, [ONMD-1002], 13765, DCE, INFO, fc-vdx40-dev-01, LLDP g
lobal configuration is changed.
2019/09/20-15:18:00, [RAS-2001], 13766,, INFO, fc-vdx40-dev-01, Audit messa
ge log is enabled.
2019/09/20-15:18:00, [RAS-2003], 13767,, INFO, fc-vdx40-dev-01, Audit messa
ge class configuration has been changed to CONFIGURATION,FIRMWARE,SECURITY.
DCE Blade: Castor board version 7
Blade Profile: profile id [0]
In cbr_chip_cfg_init
In cbr_chip_cfg_init ldev size 2048
In cbr_chip_cfg_init ldev size 0
FCOE agent in ctor function
POST1: started running Fri Sep 20 15:18:00 GMT 2019
2019/09/20-15:18:01, [HASM-1108], 13768,, INFO, VDX6740, All service instan
ces become active.
Enabling Eth switch... 1
2019/09/20-15:18:01, [NSM-2014], 13769, DCE, INFO, fc-vdx40-dev-01, VLAN su
b-profile for port-profile UpgradedVlanProfile is created.
2019/09/20-15:18:01, [NSM-2017], 13770, DCE, INFO, fc-vdx40-dev-01, Port-pr
ofile UpgradedVlanProfile is configured for switching properties.
POST1: Script PASSED with exit status of 0 Fri Sep 20 15:18:01 GMT 2019 too
k (0:0:1)
2019/09/20-15:18:01, [NSM-2019], 13771, DCE, INFO, fc-vdx40-dev-01, The tru
nk mode is configured for port-profile UpgradedVlanProfile.
2019/09/20-15:18:01, [NSM-2024], 13772, DCE, INFO, fc-vdx40-dev-01, All VL
ANs are configured as tagged VLANs for port-profile UpgradedVlanProfile.
2019/09/20-15:18:01, [NSM-2044], 13773, DCE, INFO, fc-vdx40-dev-01, Domain:
default creation successful.
2019/09/20-15:18:01, [NSM-2046], 13774, DCE, INFO, fc-vdx40-dev-01, Profile
: UpgradedVlanProfile addition to domain default successful.
2019/09/20-15:18:01, [RTM-1023], 13775, DCE, INFO, fc-vdx40-dev-01, Route
0.0.0.0/0 pointing to management interface will not be redistributed to oth
er protocols.
.
2019/09/20-15:18:01, [DCM-1003], 13776,, INFO, VDX6740, PostBoot processing
on global config is complete.
POST2: started running Fri Sep 20 15:18:04 GMT 2019
POST2: Test #1 - Running portloopbacktest -dports 1-48 (10G)
POST2: Test #2 - Running portloopbacktest -dports 49-64 (40G)
POST2: Script PASSED with exit status of 0 Fri Sep 20 15:18:12 GMT 2019 too
k (0:0:8)
LPM Critical Data Size [526336]
NH Critical Data Size [6272]
QOS-TXQ Critical Data Structure Size = [13704]
2019/09/20-15:18:19, [BL-1000], 13777,, INFO, VDX6740, Initializing ports..
.
2019/09/20-15:18:21, [BL-1034], 13778,, INFO, VDX6740, SWITCH CEE initializ
ation completed.
Set VLP module index 0 to module 0
sys_init: before msg_init1
init_dy_sync_slave(), sync_type = 49 >= 49
module_slot_pre_init: setting module # 0 fid_base to: 1774
link is up



Network OS (fc-vdx40-dev-01)


fc-vdx40-dev-01 console login:


Network OS (fc-vdx40-dev-01)


fc-vdx40-dev-01 console login: root


Password:

Disclaimer for Root and Factory Accounts Usage!

This switch is equipped with Root and Factory accounts that are intended
for diagnostics and debugging purposes solely by the Equipment vendor's
trained engineers. Improper use of the functionality made available
through the Root or Factory account could cause significant harm and
disruption to the operation of the SAN fabric.

Your use of the functionality made available through the Root or Factory
account is at your sole risk and you assume all liability resulting from
such use. The Equipment vendor shall have no liability for any losses
or damages arising from or relating to the use of the Root or Factory
account (and the functionality enabled thereby) by anyone other than
the Equipment vendor's authorized engineers.

Proceeding with the usage of this switch as the Root or Factory user
explicitly indicates your agreement to the terms of this disclaimer.

Please change passwords for switch default accounts now.
Use Control-C to exit or press 'Enter' key to proceed.

Changing default password for "root"
Warning: Access to the Root account may be required for
complete access of the switch. Please ensure the Root
password is documented in a secure location. Recovery of a
lost Root password will result in downtime.

Changing password for root
Enter new password:
Password unchanged.





passwd: Authentication token manipulation error

fc-vdx40-dev-01:root>
fc-vdx40-dev-01:root>
fc-vdx40-dev-01:root>
fc-vdx40-dev-01:root>
fc-vdx40-dev-01:root>
fc-vdx40-dev-01:root>
fc-vdx40-dev-01:root>
fc-vdx40-dev-01:root>
fc-vdx40-dev-01:root>
fc-vdx40-dev-01:root>
fc-vdx40-dev-01:root>
fc-vdx40-dev-01:root>
fc-vdx40-dev-01:root>
fc-vdx40-dev-01:root>
fc-vdx40-dev-01:root>
fc-vdx40-dev-01:root>
fc-vdx40-dev-01:root>
fc-vdx40-dev-01:root>
fc-vdx40-dev-01:root>
fc-vdx40-dev-01:root> root
sh: root: command not found
fc-vdx40-dev-01:root> password
sh: password: command not found
fc-vdx40-dev-01:root>
fc-vdx40-dev-01:root>
fc-vdx40-dev-01:root>
fc-vdx40-dev-01:root> version
Kernel: 2.6.34.6

Network OS: 4.1.3
Made on: Fri Sep 26 19:08:55 2014
Flash: Sat Nov 22 18:46:13 2014
BootProm: 1.0.1
fc-vdx40-dev-01:root> chassisshopw w

Chassis Name: BR-VDX6740
switchType: 131

FAN Unit: 1 
Time Awake: 0 days

FAN Unit: 2 
Time Awake: 0 days

POWER SUPPLY Unit: 1 
Factory Part Num: 23-1000044-01
Factory Serial Num: 
Time Awake: 0 days

POWER SUPPLY Unit: 2 
Factory Part Num: 23-1000044-01
Factory Serial Num: 
Time Awake: 0 days

CHASSIS/WWN Unit: 1
Power Consume Factor: 0
Factory Part Num: 40-1000927-06
Factory Serial Num: CPL2521K0M6
Manufacture: Day: 9 Month: 4 Year: 14
Update: Day: 2 Month: 7 Year: 2019
Time Alive: 1727 days
Time Awake: 0 days

fc-vdx40-dev-01:root> license show show
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
10G Port Upgrade license
Feature name:PORT_10G_UPGRADE
Capacity: 24
License is valid
fc-vdx40-dev-01:root> switchshow
Name: sw0
Type: 131.7
State: Online 
switchMode: Native
Role: Fabric Principal
Rbridge-id: 8
switchId: fffc08
WWN: 10:00:50:eb:1a:12:04:84
zoning: OFF
switchBeacon: OFF
FC Router: OFF
FC Router BB Fabric ID: 128
Address Mode: 0

Index Port Address Media Speed State Proto
==============================================
0 0 ------ -- -- Offline TRILL
1 1 ------ -- -- Offline TRILL
2 2 ------ -- -- Offline TRILL
3 3 ------ -- -- Offline TRILL
4 4 ------ -- -- Offline TRILL
5 5 ------ -- -- Offline TRILL
6 6 ------ -- -- Offline TRILL
7 7 ------ -- -- Offline TRILL
8 8 ------ -- -- Offline TRILL
9 9 ------ -- -- Offline TRILL
10 10 ------ -- -- Offline TRILL
11 11 ------ -- -- Offline TRILL
12 12 ------ -- -- Offline TRILL
13 13 ------ -- -- Offline TRILL
14 14 ------ -- -- Offline TRILL
15 15 ------ -- -- Offline TRILL
16 16 ------ -- -- Offline TRILL
17 17 ------ -- -- Offline TRILL
18 18 ------ -- -- Offline TRILL
19 19 ------ -- -- Offline TRILL
20 20 ------ -- -- Offline TRILL
21 21 ------ -- -- Offline TRILL
22 22 ------ -- -- Offline TRILL
23 23 ------ -- -- Offline TRILL
24 24 ------ -- -- Offline TRILL
25 25 ------ -- -- Offline TRILL
26 26 ------ -- -- Offline TRILL
27 27 ------ -- -- Offline TRILL
28 28 ------ -- -- Offline TRILL
29 29 ------ -- -- Offline TRILL
30 30 ------ -- -- Offline TRILL
31 31 ------ -- -- Offline TRILL
32 32 ------ -- -- Offline TRILL
33 33 ------ -- -- Offline TRILL
34 34 ------ -- -- Offline TRILL
35 35 ------ -- -- Offline TRILL
36 36 ------ -- -- Offline TRILL
37 37 ------ -- -- Offline TRILL
38 38 ------ -- -- Offline TRILL
39 39 ------ -- -- Offline TRILL
40 40 ------ -- -- Offline TRILL
41 41 ------ -- -- Offline TRILL
42 42 ------ -- -- Offline TRILL
43 43 ------ -- -- Offline TRILL
44 44 ------ -- -- Offline TRILL
45 45 ------ -- -- Offline TRILL
46 46 ------ -- -- Offline TRILL
47 47 ------ -- -- Offline TRILL
48 48 ------ -- -- Offline TRILL
49 49 ------ -- -- Offline TRILL
50 50 ------ -- -- Offline TRILL
51 51 ------ -- -- Offline TRILL
fc-vdx40-dev-01:root> 
fc-vdx40-dev-01:root>
fc-vdx40-dev-01:root> diagshow
Using Rev2 Castor UserPort

Diagnostic Status:
Slot: 0 PIZZA BOX 135 ENABLED 4 CASTOR
fc-vdx40-dev-01:root> sfpshow
fc-vdx40-dev-01:root> 
fc-vdx40-dev-01:root> deitchstatusshow
sh: deitchstatusshow: command not found
fc-vdx40-dev-01:root> switchstatusshow
Switch Health Report Report time: 09/20/2019 03:34:0
1 PM
Switch Name: fc-vdx40-dev-01
IP address: 10.9.1.36
SwitchState: HEALTHY
Duration: 00:16

Power supplies monitor HEALTHY
Temperatures monitor HEALTHY
Fans monitor HEALTHY
Flash monitor HEALTHY
Marginal ports monitor HEALTHY
Faulty ports monitor HEALTHY
Missing SFPs monitor HEALTHY
Error ports monitor HEALTHY


shr.numPorts: 0
All ports are healthy
fc-vdx40-dev-01:root>

Transfer of ownership of fully functional equipment and components are intended solely for reuse.

DEFINITION

FACTORY SEALED, NEW OPEN BOX, REFURBISHED = Tested for Full Functions, R2/Ready for Reuse
PREVIOUSLY OWNED, TESTED FOR KEY FUNCTIONS = Tested for Key Functions, R2/Ready for Resale
SCRAP, RETURN IN TRANSIT, ASIS, NO WARRANTY = Evaluated and Non-Functioning, R2/Ready for Repair